LINK-BELT CEA335 cartridge bearing

LINK-BELT CEA335 belongs to cartridge bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CEA335 and any equivalents.

Link-Belt CEA supports belong to the 300 series of cartridge mounted bearings. The bearing sits inside a cylindrical housing that bolts to the structure, so the shaft line gets a self-aligning support point. These units are common in transmission equipment where the housing has to fit a bored wall or frame.

Reading the code: the CEA letters mark the cartridge support family, and the digits that follow point to a specific housing and shaft combination inside the 300 series. CEA323, CEA327 and CEA331 are three such combinations. Every code covers a complete assembly: bearing, housing and sealing. If you are unsure what a suffix on your machine means, send the full code and we will identify the equivalent.

Typical duty covers belt conveyors, bucket elevators, mixers, mills and process lines in food, chemical and aggregate operations. The cylindrical cartridge fit lets maintenance crews mount the unit on a wall or frame and pull it for replacement without reworking the shaft. That is the main reason these supports appear in packaging lines, grain conveyors and material handling systems.

Selection comes down to shaft diameter, mounting style and the environment around the bearing. Confirm that the sealing suits the level of dust, moisture or washdown present. During mounting, line the housing up with the shaft and tighten the fixing without loading the bearing. Use the lubricant called out for the working temperature, and check internal clearance where vibration is present. We can walk you through these points.

Link-Belt CEA supports can be swapped with other brands of cartridge mounted bearings built to the same dimensional standard. Shaft diameter, center height and mounting type decide whether the swap works. If the equipment carries a competitor's code, send us the data and we will name the compatible option from the line we supply. Never substitute on guesswork: a small dimensional difference can throw off alignment.