LINK-BELT 3226PT3 pillow block bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- Flex-block
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
LINK-BELT 3226PT3 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3226PT3 and any equivalents.
Flex-block units from Link-Belt are mounted pillow block bearings that arrive as one assembly: bearing and housing joined and ready to bolt down. They carry rotating shafts in conveying and transmission equipment, where shaft alignment and sealing matter. MR Industrial Accessories LLC supplies this line to customers throughout the United States and Latin America.
Reading the Flex-block code helps you order the right unit. The leading digits give the housing size, the letters PT mark the split pillow block layout, and the trailing number separates sealing and fastening versions of that same size. So 3210PT1 and 3210PT3 are the same size with different seals or mounting arrangements. Before you request a quote, have the equipment drawing and the full designation stamped on the housing at hand.
You will find these housings on belt conveyors, bucket elevators, mixers, mills and process lines in food, chemical and aggregate operations. They suit installations where the shaft may be slightly out of line and where a bearing change should not require tearing down the whole assembly. Dusty or washdown areas call for the variant with heavier sealing.
Selection comes down to shaft diameter, radial and axial load, and the surrounding conditions. Confirm internal clearance and lubrication against the working temperature. At mounting, set the housing on a rigid base, line it up with the shaft, then tighten the bolts; misalignment will cut bearing life.
Flex-block housings can replace other mounted pillow block bearings of matching dimensions when shaft diameter, center height and bolt pattern agree. Compare the complete designation and main dimensions, not just the series number. A compatible alternative can also be reviewed when you send your request.
To get a quote, message the full part number on WhatsApp or by email. The team answers quickly, points out equivalent options and helps you pick the right variant.
Dimensions
- Bore
- 1 5/8 in
Frequently asked questions
- What does PT indicate in a Link-Belt Flex-block housing?
- PT marks the split pillow block configuration in the Flex-block series. The digits after it, such as 3210PT1 or 3210PT3, identify sealing or fastening variants of the same housing size.
- How do I decide between 3210PT1 and 3210PT3?
- They differ in seal type and mounting method. Look at the equipment environment: dust or water points to the version with heavier sealing. Send both part numbers on WhatsApp and the team will help you choose.
- Can Flex-block housings interchange with other brands?
- They interchange with other mounted pillow block bearing lines of equal dimensions. Verify shaft diameter, center height and mounting pattern, then send the part number and dimensions on WhatsApp so an alternative can be identified.