INA VKE38-211-KTT-B-GA47/70-AH01 y-bearing (insert bearing)
- Brand
- INA
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
INA VKE38-211-KTT-B-GA47/70-AH01 belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for VKE38-211-KTT-B-GA47/70-AH01 and any equivalents.
A Y-bearing, also called an insert bearing, combines a spherical outer ring with a locking system that grips the shaft, so it drops into split plummer block or flanged housings. The INA VKE line suits shafts that turn on supports meant to go on and come off easily, as found on conveyors, belt drives and agricultural machinery. MR Industrial Accessories supplies this series and helps you pin down the exact variant from its code.
Reading the code tells you what you are holding. Take VKE38-211-KTT-B-GA47/70-AH01: 38 is the shaft diameter, 211 the insert size, KTT the seal style, B the outer ring design, GA47/70 a groove or special feature, and AH01 the locking method. Because each block is configured for its application, the complete code is what we need to quote.
Typical mounting is in split plummer block, flanged or take-up housings. Belt conveyors, grain elevators, mills, mixers and aggregate processing equipment are common homes for these inserts, since fast installation and straightforward replacement keep maintenance downtime short.
Selection comes down to three things: shaft diameter, seal type (KTT or another) and how the insert locks to the shaft. Seals handle dust and moisture; locking may be set screws, eccentric or taper. During mounting, align the housing and do not strike the insert directly. Grease it according to the duty cycle and verify radial clearance once it is tightened.
Inserts from different makers can interchange when the main dimensions, seal type and locking match. SKF, NSK and NTN all list equivalents, but suffixes differ and do not always line up, so compare the full code plus the shaft and housing dimensions before swapping. If anything is unclear, send both the original code and the one on the equipment.
For an INA VKE Y-bearing, message us on WhatsApp with the complete code or a photo of the nameplate. Our team replies promptly with a quote and can also advise on housings, seals and lubricants for the installation.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I identify the VKE Y-bearing I need?
- Give us the complete code from the bearing or the equipment manual. Without it, send a photo of the part along with the shaft and housing dimensions, and we can trace the exact variant.
- Can another brand replace it?
- Often yes, provided the main dimensions, seal type and locking system agree. SKF, NSK and NTN offer equivalents, but suffixes vary, so check the full code and dimensions first.
- What lubrication does this bearing take?
- INA Y-bearings normally arrive pre-lubricated. If relubrication is needed, use a medium-consistency grease suited to the seal and operating temperature. Ask us which lubricant fits your application.