INA RABRA30/62-XL-FA106 y-bearing (insert bearing)

INA RABRA30/62-XL-FA106 belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for RABRA30/62-XL-FA106 and any equivalents.

The INA RABRA-XL-FA is a Y-bearing, also called an insert, featuring a spherical outer ring and extensions that secure it to the shaft. It is designed for equipment where the bearing sits in a split or pillow block housing and requires some alignment capability. This series includes both metric and inch sizes, with sealing and screw fixing options.

The RABRA-XL-FA code breaks down into distinct parts: RABRA denotes the family of Y-bearings with a spherical outer ring and screw fixing; XL signifies the current design generation; FA indicates the sealing type and the extensions. The number after RABRA, such as in RABRA30/62-XL-FA106, specifies the shaft diameter and outer diameter—in this case, 30 mm shaft and 62 mm outer. Suffixes at the end differentiate sealing or fixing variants within the series.

Typical mounting locations include split, pillow block, or flanged housings. You will find these bearings in conveyors, belts, elevators, mixers, mills, and process equipment, as well as in fans and horizontal shaft pumps. They are common in food plants, cement plants, paper mills, and agricultural settings, where dust and humidity demand dependable sealing. Using standard housings allows replacing the insert without changing the housing.

When selecting, verify the shaft diameter, bearing outer diameter, and fixing method. Set screws on the inner ring are most common, but taper sleeve systems also exist. The FA sealing guards against dust and splashes; in very humid or washdown-heavy environments, check lubrication and lip condition regularly. During mounting, align the housing and tighten screws evenly to prevent inner ring deformation.

For interchangeability, Y-bearings are identified by metric or inch dimensions and fixing type, not by manufacturer-specific codes. An insert from another brand with matching shaft diameter, outer diameter, and width may be equivalent, but always confirm sealing and extension shape. There is no universal cross-reference; equivalence is verified by comparing drawings or measuring the part. If uncertain, provide the measurements and the code engraved on the bearing.

MR Industrial Accessories supplies the INA brand within its range of bearings and mounting accessories. If you need the RABRA-XL-FA for a specific piece of equipment, send the full code or the shaft and housing measurements via WhatsApp or email. The team will respond promptly to quote and help confirm the correct variant, including suggesting equivalents if needed.