INA NATV30-PP support roller
- Brand
- INA
- Category
- Bearings
- Subcategory
- Cam follower and support roller
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
INA NATV30-PP belongs to support roller, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NATV30-PP and any equivalents.
The INA NATV-PP is a yoke roller built around a cylindrical roller bearing with a thick-walled outer ring, made to carry high radial loads while running on tracks or cams. Typical duties include guidance systems, cam drives and lifting mechanisms, where a small, stiff component is needed.
Reading the code helps you order the right item. NATV tells you it is a cylindrical roller yoke roller with a heavy-section outer ring. The digits after it give the outside diameter in millimeters for that series. The -PP ending means contact seals sit on both sides, so grease stays in and contaminants stay out.
You will find these rollers in machine tools, automation equipment, conveyors, presses, cranes and linear guidance. They also show up in food processing, automotive and metalworking plants, where space is tight, radial loads are significant and the surroundings may be dusty or damp. Because they are sealed, they tolerate these conditions without constant relubrication attention.
When selecting, start from the outside diameter your space allows and the load the roller has to take. A -PP sealed version suits dirty environments. If the roller runs directly against a track, check the hardness and surface finish of that track. At mounting, keep the alignment correct so no unwanted axial loads appear, apply lubrication before start-up, and secure the roller on a shaft or pin matched to the bore.
For cross-referencing, rollers from other makers that use the same dimensional and sealing designation can serve as alternatives, as long as dimensions and load capacity line up. Check tolerances and seal type carefully, since small differences change how the roller performs. Our team can review your application if you want confirmation before substituting.
To get a quote on an INA NATV-PP yoke roller, send the part number or model by WhatsApp or email. We can also suggest equivalents and help you match the roller to your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does -PP indicate on an INA NATV roller?
- -PP means the roller has contact seals on both sides. The seals keep lubricant in place and block contaminants, which helps in dirty or damp service.
- How do I pick the right NATV-PP size?
- The number in the designation is the outside diameter in millimeters. Match it to the space you have and the radial load involved. If you are unsure, send us your application dimensions.
- Can I replace a NATV-PP roller with another brand?
- Often yes, if the other roller shares the same dimensions and sealing designation. Verify dimensions and tolerances first, and ask us to confirm the match.