INA GLE70-XL-KRR-B y-bearing (insert bearing)

INA GLE70-XL-KRR-B belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GLE70-XL-KRR-B and any equivalents.

The INA GLE-XL-KRR-B is a Y-bearing insert, also called an insert bearing, built with a spherical outer ring so it can sit inside split plummer block housings, flanged housings and take-up units. It suits equipment that gets serviced often, such as conveyors, fans, mixers and farm machinery, because it mounts and comes apart quickly.

Reading the code helps when you order. GLE marks the Y-bearing family with a spherical outer ring and set screw locking. XL is the optimized design generation from INA. KRR is the double-lip rubber seal. The trailing B is a variant of the inner ring construction. In GLE20-XL-KRR-B, GLE25-XL-KRR-B and GLE30-XL-KRR-B, the number in the middle is the bore in millimeters: 20, 25 and 30 mm. The line runs from GLE20 through GLE60.

Typical installations include split plummer block housings, flanged housings and take-up units on conveyors, bucket elevators, mixers, fans and milling equipment. Agricultural users fit them on seeders, combine harvesters and grain storage plants, while industrial plants use them on packaging and internal transport lines. The spherical outer ring absorbs small misalignments between shaft and housing, which keeps mounting simple on welded or folded sheet metal frames.

Start your selection with the shaft diameter and the housing the insert will sit in. Then confirm the KRR seal suits the surroundings: dust, moisture or frequent washdowns call for seals in good condition and proper lubrication. During mounting, set the insert into the housing without hammering on the outer ring, tighten the set screws against the shaft with the right wrench, and spin the shaft to confirm it turns freely. Alignment and lubrication on a regular schedule keep the assembly running.

Y-bearings from different makers can be swapped when bore, width and locking method line up, but seal suffixes and tolerances differ by brand. Compare those points before substituting one part number for another, since the wrong seal can cut service life in dirty conditions. If you are unsure, send the full insert part number along with your shaft dimensions.

To get a quote on a GLE-XL-KRR-B series Y-bearing, message us on WhatsApp with the part number printed on the equipment or the housing plate. We answer quickly with the matching reference and, when needed, the compatible housing, and we can also walk you through mounting and lubrication.