GUMMI A-95 flexible coupling
- Brand
- GUMMI
- Category
- Power transmission
- Subcategory
- Couplings
- Series
- Tipo A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GUMMI A-95 belongs to flexible coupling, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A-95 and any equivalents.
The GUMMI A-95 is a flexible coupling from the Type A line, built to link two shafts while soaking up misalignment, vibration and torque spikes thanks to its rubber flexible center. It suits machines that need protection from shock loads and quieter operation. MR Industrial Accessories supplies this coupling and helps you match the right configuration to your drivetrain.
This A-95 unit comes in the two standard hubs (CN) arrangement. Key figures: nominal torque 2380 Nm, maximum bore 90 mm, pilot bore 40 mm, flexible center diameter 330 mm, overall length 250 mm, weight 34.9 kg. The rubber element is what carries the motion and damps dynamic loads.
You will find the A-95 on centrifugal pumps, fans, compressors, conveyors and machine tools. In each case it takes up small angular, radial and axial offsets and cuts vibration transfer between the motor and the driven equipment. That makes it a solid pick for tough industrial settings.
When sizing the A-95, look at the nominal torque you need, the shaft diameters you are joining and the space you have. The 90 mm maximum bore and 40 mm pilot bore are your references for machining. Confirm that the two standard hubs setup fits your assembly. Aligning the coupling properly at installation and checking the flexible element on a regular basis will help it last.
If you are after an equivalent, message us on WhatsApp with the part number or model. We can point you to other Type A configurations or alternatives from the brands we carry. MR Industrial Accessories helps you find the right part for your equipment.
To request a quote for the GUMMI A-95 or ask about variants, send the part number by WhatsApp to MR Industrial Accessories. We will get back to you shortly with what you need to move forward.
Dimensions
- Model
- A-95
- Configuration
- Two standard hubs (CN)
- Nominal torque
- 2380Nm
- Max bore
- 90mm
- Pilot bore
- 40mm
- Elastic center Ø
- 330mm
- Overall length
- 250mm
- Weight
- 34,9kg
Frequently asked questions
- What does the two standard hubs configuration mean on the GUMMI A-95?
- The CN designation means both hubs are standard, without special flanges or hubs. It is the usual version for keyed shaft mounting. If your setup calls for a different arrangement, ask us on WhatsApp.
- What is the nominal torque of the A-95 coupling?
- The nominal torque is 2380 Nm. Use this figure as your baseline when matching the coupling to your machine load. For applications with torque peaks, check the service factor and contact us.
- Can I get a coupling with a bore other than 90 mm?
- The maximum bore is 90 mm, but it can be machined down to suit your shaft diameters. The 40 mm pilot bore makes final machining easier. Send us the exact dimensions you need.