GUMMI A-35 flexible coupling
- Brand
- GUMMI
- Category
- Power transmission
- Subcategory
- Couplings
- Series
- Tipo A
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GUMMI A-35 belongs to flexible coupling, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for A-35 and any equivalents.
The GUMMI A-35 is a flexible coupling that connects two shafts while compensating for misalignment and damping vibration and torsional shock. Its rubber elastic center and two standard hubs (CN) suit equipment that needs smooth operation and a degree of overload tolerance. Typical users include pumps, fans, conveyors, and general industrial machinery.
This coupling is part of the Type A series and is supplied in the CN configuration, meaning two standard hubs. It is rated for a nominal torque of 113 Nm, with a maximum bore of 32 mm and a 10 mm pilot hole. The elastic center measures 127 mm in diameter, the overall length is 110 mm, and the unit weighs 2.65 kg. These figures define its role in continuous power transmission at moderate loads.
You will find the A-35 on centrifugal pumps, axial fans, belt conveyors, mixers, and machine tools. It also fits low- and medium-power drives where small angular or radial misalignments must be absorbed and where vibration could otherwise affect bearings or gears.
When selecting the coupling, check the required nominal torque, the shaft diameters, and the rotation speed. The 32 mm maximum bore sets the shaft size limit. The 10 mm pilot hole can be machined to the final bore you need. During installation, verify alignment and use appropriate fasteners to prevent axial movement.
If your application calls for a different bore, higher torque, or another configuration, send the code or model you are looking for via WhatsApp or email. The team can suggest alternatives from the same Type A series or from other flexible coupling lines and help you choose the right one.
To request a quote for the GUMMI A-35 or to ask about an equivalent, send the code A-35 through WhatsApp or email. You will receive a prompt reply with the information needed for your project.
Dimensions
- Model
- A-35
- Configuration
- Two standard hubs (CN)
- Nominal torque
- 113Nm
- Max bore
- 32mm
- Pilot bore
- 10mm
- Elastic center Ø
- 127mm
- Overall length
- 110mm
- Weight
- 2,65kg
Frequently asked questions
- What does the CN configuration mean on the GUMMI A-35 coupling?
- CN stands for two standard hubs, so both ends of the coupling have standard hubs for mounting on the shafts. This is the most common setup and allows transmission of the 113 Nm nominal torque with a maximum bore of 32 mm.
- What is the nominal torque of the A-35 coupling?
- The nominal torque of the GUMMI A-35 is 113 Nm. This value represents its continuous power transmission capacity under normal service conditions. The rubber elastic center provides some tolerance for momentary overloads.
- Can I order a coupling with a bore other than the standard one?
- Yes. The 10 mm pilot hole can be machined up to a maximum of 32 mm to match your shaft diameter. Send the size you need via WhatsApp or email and the team will quote the appropriate option.