V-belt Gates XPZ 3350 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Quad-Power 4 PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ 3350 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 3350 PowerBand and any equivalents.
The Gates XPZ 3350 PowerBand is a banded V-belt from the Quad-Power 4 line, with a 3350 mm length. Before you fit a replacement, take a close look at the drive and its sheaves. A worn or misaligned sheave can shorten the life of any new belt.
Check each sheave groove for wear, rust, or embedded debris. Look for a step or ridge where the belt rides, and confirm the grooves are clean and smooth. Misalignment between sheaves will cause the belt to track poorly and wear unevenly, so verify that the pulleys are in line with each other. Also inspect the bushing and key for looseness, and make sure the sheave runs true without wobble.
Once the drive checks out, confirm the belt marking matches what you need. This belt is marked XPZ 3350 PowerBand, and its length is 3350 mm. If you are replacing a set, order the same number of belts as the drive requires and fit them together. Mixing a new belt with old ones can cause uneven load sharing, especially on banded belts.
When you are ready to order, send us the part number Gates XPZ 3350 PowerBand, along with the quantity you need. If you have the old belt, a photo of the back marking helps us confirm the exact profile and length. We can also help you verify the right belt for your drive or suggest an equivalent based on the data you provide.
Dimensions
- Length
- 3350mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, rust, or debris in the grooves. Check alignment between pulleys and make sure the sheave runs true. Any misalignment or worn groove can damage the new belt.
- How do I confirm this is the correct belt for my application?
- Look at the marking on the back of the old belt. It should read XPZ 3350 PowerBand. If it does, this belt matches that profile and length. If you are unsure, send us the old belt marking and we can help verify.
- Can you help me find an equivalent if this exact belt is not what I need?
- Yes. Send us the part number and any details from the old belt, such as the profile and length. We will review the data and suggest a suitable equivalent.