V-belt Gates XPZ 3150
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ 3150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 3150 and any equivalents.
This Gates Quad-Power 4 belt is a cogged narrow V-belt with profile XPZ and a length of 3150 mm. Cogged narrow V-belts are used on industrial drives where a compact, high-capacity belt is needed, such as on pumps, fans, compressors and other machinery. To confirm fit, match the profile and length to your drive and check the marking on the old belt.
The XPZ profile and 3150 mm length are the key dimensions. The same size is also listed under Optibelt XPZ 3150, so you can compare that reference when reviewing your drive. The cogged construction is typical for this belt type, which is common on drives that run at higher speeds or use smaller pulleys.
Before ordering, read the marking on the back of the old belt. It should show the profile and length, and possibly the brand and series. If the marking is worn, measure the outside length and compare it to 3150 mm, and check the pulley groove profile to confirm it matches XPZ. Also inspect the pulleys for wear and alignment, and replace belts in sets where multiple belts run together.
When you request a quote, send the part number XPZ 3150 and the quantity you need. If you are unsure about the profile or length, send a photo of the old belt marking and the pulley grooves. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 3150mm
Frequently asked questions
- How do I confirm that the Gates XPZ 3150 fits my drive?
- Check the marking on your old belt for XPZ and 3150 mm. Also confirm the pulley groove profile matches XPZ and that the length matches your drive requirements. If you need help, send us a photo of the marking and the pulleys.
- What does the 3150 mm length refer to?
- The 3150 mm is the belt length as given in the product data. Use this value together with the XPZ profile to match your existing belt. If your old belt marking is unclear, measure the outside length and compare it to 3150 mm.
- Can I use the Optibelt XPZ 3150 instead?
- The same size is also listed under Optibelt XPZ 3150. You can use that reference when comparing, but always confirm the profile and length match your drive. If you need assistance, send us the part number and we can help confirm the right belt.