Skip to main content
All products
Gates Quad-Power 4 cogged narrow V-belt · GATES XPZ 2840
V-belt Gates XPZ 2840

GATESBrand We Carry

V-belt Gates XPZ 2840

Manufacturer part numberXPZ 2840Also known as: XPZ2840
Brand
GATES
Subcategory
V-belts
Section
XPZ
Series
Quad-Power 4
Get a quote for XPZ 2840 on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Other brands for this category

Ask us for alternatives. We check every equivalent against the part number and your application.

GATES and OPTIBELT: matching part numbers →

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

GATES XPZ 2840 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 2840 and any equivalents.

The Gates Quad-Power 4 XPZ 2840 is a cogged narrow V-belt with an XPZ profile and a 2840 mm length. To match it to the belt you are replacing, confirm both the profile and the length on the old belt.

The cleanest match is the marking on the back of the belt being replaced. Look for the XPZ profile and the 2840 mm length, then compare them with this belt. If the old belt is worn or the marking is gone, measure the outside length and check the drive for the profile.

The same size is also listed under Optibelt XPZ 2840, so you can compare that listing if it helps confirm the size. When a drive uses more than one belt, replace the full set at the same time so the belts share the load evenly.

If you are unsure, send the part number from the old belt or the drive details by WhatsApp or email. We carry the Gates Quad-Power 4 XPZ 2840 and can help confirm the right belt or suggest an equivalent.

Dimensions

Section
XPZ
Length
2840mm

Frequently asked questions

How do I confirm this is the right belt for my drive?
Check the marking on the old belt for the XPZ profile and 2840 mm length. If the marking is not readable, measure the old belt and inspect the drive before ordering.
Can I replace just one belt on a multi-belt drive?
For drives that use more than one belt, replace the full set at the same time so all belts carry the load evenly.
What should I send to request a quote?
Send the part number Gates Quad-Power 4 XPZ 2840, or the marking from the old belt, by WhatsApp or email. We will confirm the belt or suggest an equivalent.
Get a quote for XPZ 2840 on WhatsApp
Quote on WhatsApp