V-belt Gates XPZ 1662
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ 1662 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 1662 and any equivalents.
This Gates Quad-Power 4 belt is a cogged narrow V-belt with an XPZ profile and a length of 1662 mm. Cogged narrow V-belts are used on industrial drives where space is limited and speeds are higher than standard V-belt drives. To confirm fit, match the profile and length to your drive and check the marking on the old belt.
The XPZ profile is a narrow wedge section, and the 1662 mm length is the datum length. The cogged construction helps the belt run cooler and more flexibly on small pulleys. This belt is common on pumps, fans, compressors, and other equipment where a compact, high-speed drive is required.
When replacing, read the marking on the back of the old belt. It should show the profile and length, such as XPZ 1662. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to the length listed here. Also check pulley condition and alignment; worn pulleys can shorten belt life.
The same size is also listed under Optibelt XPZ 1662. If you need to confirm the right belt for your drive, send the part number and photos of the old belt and pulleys via WhatsApp or email. Our team can help you verify the profile and length and suggest an equivalent if needed.
Dimensions
- Section
- XPZ
- Length
- 1662mm
Frequently asked questions
- How do I confirm that this XPZ 1662 belt fits my drive?
- Check the marking on the back of your old belt. It should read XPZ 1662 or show the same profile and length. If the marking is not clear, measure the outside length and compare it to 1662 mm. Also verify that the pulley grooves are for an XPZ profile.
- What is the difference between a cogged and a standard narrow V-belt?
- A cogged belt has a notched inner surface that improves flexibility and heat dissipation. This makes it suitable for smaller pulleys and higher-speed drives where a standard belt might run hotter or flex less easily.
- Can I use this belt on a drive that originally had a different brand?
- Yes, if the profile and length match. The same size is also listed under Optibelt XPZ 1662. Always confirm the profile and length against your drive requirements before installing.