V-belt Gates XPZ 1550
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ 1550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 1550 and any equivalents.
When you need to replace a belt, the marking on the old belt is your best starting point. This page covers the Gates XPZ 1550 from the Quad-Power 4 series, a cogged narrow V-belt with profile XPZ and length 1550 mm. Use the steps below to confirm it matches your drive before you request a quote.
A worn belt often still carries its identification on the back. Look for the profile and length: XPZ and 1550 mm. These two values define the belt's cross-section and outside length. If the old belt is too damaged to read, check the drive's documentation or measure the pulley groove and the belt path to compare with the XPZ profile and 1550 mm length.
The Gates XPZ 1550 is a cogged narrow V-belt, also called a wedge belt. The cogged construction is typical for this profile. When you replace it, inspect the pulleys for wear, alignment and debris, and check that the tensioner moves freely. If the drive uses multiple belts, replace them as a set so they share the load evenly.
To request a quote, send the part number XPZ 1550, the brand Gates, and the quantity you need. If you are unsure whether this is the correct belt, include a photo of the old belt's marking and the drive nameplate. Our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 1550mm
Frequently asked questions
- How do I read the marking on my old belt?
- Look for the profile and length on the back of the belt. For this belt, the marking shows XPZ and 1550 mm. If the marking is unreadable, check the drive documentation or measure the pulley grooves and belt path.
- What does the XPZ profile mean?
- XPZ is the profile of this cogged narrow V-belt. The profile determines the cross-section that fits the pulley groove. This belt has a length of 1550 mm.
- What information should I send for a quote?
- Send the part number XPZ 1550, the brand Gates, and the quantity. If you are unsure, include a photo of the old belt's marking and the drive nameplate so we can confirm the belt or suggest an equivalent.