V-belt Gates XPZ 1037
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPZ 1037 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 1037 and any equivalents.
This Gates Quad-Power 4 belt is a cogged narrow V-belt in the XPZ profile with a 1037 mm length. Before you fit it, inspect the drive and sheaves so the new belt runs true and wears evenly.
Check sheave grooves for wear, burrs, rust, or embedded debris. Worn grooves let a new cogged narrow V-belt sit too low, which leads to slip and heat. Confirm the sheaves are aligned and the shafts turn freely by hand. If a groove is damaged, correct it before fitting the belt.
Set the correct tension for the XPZ profile and recheck it after the first run-in. A cogged narrow V-belt should sit properly in the groove, not bottom out. Look for oil, heat, or misalignment that could shorten belt life. The same size is also listed under Optibelt XPZ 1037.
For a quote, send the part number XPZ 1037 and the quantity you need. If you are unsure of the profile or length, share the marking on the back of the old belt and photos of the drive. We carry the Gates Quad-Power 4 line and can confirm the right belt for your application.
Dimensions
- Section
- XPZ
- Length
- 1037mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, burrs, or debris, verify alignment, and make sure the shafts turn freely. Correct any groove damage before fitting the new belt.
- How do I identify the right replacement belt?
- Use the marking on the back of the old belt. This belt is XPZ profile with a 1037 mm length, and the same size is also listed under Optibelt XPZ 1037.
- What information do you need for a quote?
- Send the part number XPZ 1037 and the quantity. If you are unsure, include photos of the drive and the old belt marking so we can help confirm the correct belt.