V-belt Gates XPB5600/5VX2205
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPB5600/5VX2205 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPB5600/5VX2205 and any equivalents.
The Gates XPB/5VX is a narrow-section V-belt that carries motion from one pulley to another in industrial drives. It fits equipment where a compact profile is needed and dependable transmission matters. MR Industrial Accessories LLC supplies this line and helps buyers match the belt to their drive.
Reading the code is the first step in choosing the right belt. The XPB/5VX prefix identifies the narrow profile in both metric and inch terms. In a reference such as XPB1000/5VX398, the 1000 gives the outside length in millimeters, while 398 is the inch length multiplied by ten. The series runs from 1000/398 through 1280/510, so several drive ratios can be covered.
Typical duties include centrifugal pumps, fans, compressors, mills and conveyors, along with drives in food, chemical, mining and cement operations. Because the section is narrow, these belts suit layouts where room around the pulleys is tight.
When sizing a belt, check the power to be transmitted, the running speed and the pulley diameter. Correct pulley alignment and tension matter just as much, since either being off shortens belt life. Keep oil, grease and other contaminants away from the belt and the pulleys, and inspect the rubber for cuts or cracks.
A Gates XPB/5VX can take the place of another make that shares the same profile and length designation, so existing equipment can keep its original dimensions. On multi-belt drives, swap the whole set at once so the belts work evenly together.
To get a quote, send the complete part number or the size marked on the machine through WhatsApp or email. Our team answers quickly, points you to equivalent references and helps confirm the exact belt when the marking is unclear.
Dimensions
- Número de producto
- 9645-05600
Frequently asked questions
- How do I find the size of an XPB/5VX belt?
- The length is built into the reference. In XPB1000/5VX398, the outside length is 1000 mm, and 398 is the inch length times ten. Measure the belt you are replacing or check the equipment manual for the part number.
- Can a Gates XPB/5VX replace a belt from another brand?
- Yes, as long as the profile and length designation are the same. These dimensions are standardized, so an equivalent reference will fit. Replace every belt in the set at the same time.
- What maintenance does a V-belt need?
- Keep it clear of oils, greases and chemicals. Maintain pulley alignment and correct tension, and check periodically for cuts, cracks or slack, replacing the belt when any appear.