V-belt Gates XPB 4000 PowerBand
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- Quad-Power 4 PowerBand
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPB 4000 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPB 4000 PowerBand and any equivalents.
The Gates XPB 4000 PowerBand is a banded V-belt from the Quad-Power 4 series. Banded construction ties multiple V-belts together so they run as a matched set on drives that must stay in sync. This belt is identified by its XPB profile and 4000 mm length.
Banded V-belts are common on drives where a single belt would whip or turn over, such as multi-groove industrial drives running at higher speeds or with pulsating loads. The band keeps the individual belts aligned and shares the load across the set. If you are replacing a set, note the belt marking on the back: it should read XPB 4000 PowerBand, and all belts on the drive should match.
To confirm fit, check the existing belt's profile and length against XPB and 4000 mm. Measure the length only if the marking is unreadable, and compare the cross-section to a known XPB belt. Also inspect the sheaves for wear, alignment and proper groove condition before installing a new banded set.
For a quote, send the part number XPB 4000 PowerBand, the quantity needed, and the drive or equipment it serves. If you are unsure whether this is the correct belt, include a photo of the old belt's back marking and the sheave grooves. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 4000mm
Frequently asked questions
- How do I confirm the Gates XPB 4000 PowerBand is the right belt for my drive?
- Check the marking on the back of your existing belt. It should read XPB 4000 PowerBand. Confirm the profile is XPB and the length is 4000 mm. If the marking is worn, measure the outside length and compare the cross-section to a known XPB belt.
- Can I replace just one belt in a banded set?
- Banded V-belts are designed to run as a set. Replacing only one belt can cause uneven loading. We recommend replacing all belts on the drive at the same time with the same part number.
- What information do you need to quote the XPB 4000 PowerBand?
- Send the part number XPB 4000 PowerBand, the quantity, and the equipment or drive it is for. If you want us to verify the fit, include a photo of the old belt's back marking and the sheave grooves.