V-belt Gates XPB 3440
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPB 3440 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPB 3440 and any equivalents.
The Gates XPB 3440 is a cogged narrow V-belt in the Quad-Power 4 series, with an XPB profile and a 3440 mm length. Before it goes on the drive, inspect the sheaves and alignment so the new belt runs as intended.
Check sheave grooves for wear, scoring, or a polished lip that can let the belt sink too deep. Confirm the sheaves are clean and free of debris, and that no groove has a step or ridge. Misalignment between sheaves shortens belt life, so verify the drive is straight and the shafts are parallel before fitting the XPB 3440.
If the old belt failed early, look at the sheaves and the drive layout first. A worn groove or a bent shaft will damage the replacement in the same way. Once the drive checks out, fit the Gates XPB 3440, tension it to the drive maker's specification, and recheck tension after the first run-in period.
For a quote, send the part number Gates XPB 3440, the profile XPB, and the length 3440 mm. If you are unsure whether this is the right belt for the drive, include the belt marking and the sheave details, and our team will help confirm the selection.
Dimensions
- Section
- XPB
- Length
- 3440mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheave grooves for wear, scoring, or ridges, and confirm the sheaves are aligned and the shafts are parallel. Correct any misalignment or groove damage before fitting the new belt.
- How do I identify the Gates XPB 3440 on the old belt?
- Look for the part number and profile on the back of the belt. The marking should show XPB and the length 3440 mm, along with the Gates Quad-Power 4 series.
- What information do you need to quote this belt?
- Send the part number Gates XPB 3440, or the profile XPB and length 3440 mm. If you want us to confirm the selection, include the belt marking and your sheave details.