V-belt Gates XPB 2800
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPB 2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPB 2800 and any equivalents.
This is a Gates Quad-Power 4 cogged narrow V-belt in profile XPB with a length of 2800 mm. The profile sets the cross-section that must match your pulley groove, and the length sets the fit on the drive. Both values are read directly from the belt marking, so ordering is a matter of confirming the two against the drive.
When you select by profile and length, XPB and 2800 mm are the two figures that decide whether the belt sits correctly in the sheave and runs at the right center distance. If the belt currently on the drive is worn or its marking has rubbed off, measure or read what remains and compare it with these values before you request a quote.
The same size is also listed under Optibelt as XPB 2800, which gives you a second reference point when you are checking a replacement against an existing belt. Send the part number, the profile and the length, and note how many belts the drive takes so the set can be matched.
For a quote, send the part number XPB 2800, or the full marking from the back of the belt. If the drive runs more than one belt, send the quantity and any photos of the sheaves and the old belt. We carry the Gates Quad-Power 4 line and can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPB
- Length
- 2800mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The XPB profile defines the cross-section that has to match the pulley groove, and 2800 mm is the length that positions the belt on the drive. Both are stated on the belt and are the two figures to confirm before ordering.
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the belt and compare it with XPB 2800. If the marking is no longer readable, measure the belt and check the profile against the sheave before requesting a quote.
- What should I send for a quote?
- Send the part number XPB 2800, or the full marking from the belt, along with the quantity needed for the drive. If several belts run together, include the number so the set can be matched.