V-belt Gates XPB 1550
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPB
- Series
- Quad-Power 4
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES XPB 1550 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPB 1550 and any equivalents.
This Gates XPB 1550 belt is a cogged narrow V-belt from the Quad-Power 4 series. It is used on industrial drives where a compact, high-grip belt is needed, such as pumps, fans, compressors and other process equipment. Confirm fit by matching the profile and length to your existing belt.
To check whether this belt fits your drive, read the marking on the back of the old belt. The profile is XPB and the length is 1550 mm. If those two values match your current belt, this Gates XPB 1550 is the correct size. The cogged construction is typical of drives that run at higher speeds or use smaller pulleys, where a standard wrapped belt may not perform as well.
Before ordering, inspect the pulleys for wear, alignment and debris, and check that the belt tension is set to the drive manufacturer's specification. On multi-belt drives, replace all belts in the set at the same time so the load stays evenly distributed. A worn pulley groove or misaligned drive can shorten belt life, even with the correct size.
Send us the part number XPB 1550, or a photo of the belt marking, by WhatsApp or email. Our team replies promptly and can confirm the right belt for your drive or suggest an equivalent if needed.
Dimensions
- Section
- XPB
- Length
- 1550mm
Frequently asked questions
- How do I confirm that the Gates XPB 1550 is the right belt for my drive?
- Check the marking on the back of your existing belt. The profile should be XPB and the length should be 1550 mm. If both match, this belt is the correct size. You can also send us a photo of the marking for confirmation.
- What should I check on the drive before installing a new belt?
- Inspect the pulleys for wear, alignment and debris, and verify that the belt tension meets the drive manufacturer's specification. On multi-belt drives, replace all belts in the set at the same time.
- How do I request a quote for this belt?
- Send the part number XPB 1550 by WhatsApp or email. Our team replies promptly and can help confirm the right belt or suggest an equivalent.