V-belt Gates SPZ 950 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 950 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 950 MN and any equivalents.
The Gates SPZ 950 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile and a 950 mm length. This page gives you the dimensions to match it to the belt you are replacing.
To match this belt to the one being replaced, read the marking on the back of the old belt. Look for the profile and length: SPZ and 950 mm. Then check the dimensions. This belt has a top width of 9.7 mm, a height of 8 mm and a 40 degree angle. If those numbers match the belt you are removing, the SPZ 950 MN is the correct profile and length.
If the old belt is worn or the marking is unreadable, measure the top width and the outside length. Compare them with the values above. A narrow wedge V-belt in the SPZ profile is not the same as a classic V-belt, so use the profile and length together when matching. Do not rely on the part number alone if the belt has been replaced before with a different profile.
When you request a quote, send the part number SPZ 950 MN and the quantity. If you are replacing more than one belt on the same drive, note that as well. The team can confirm the profile and length from the data you provide.
Dimensions
- Section
- SPZ
- Length
- 950mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the marking on the old belt for SPZ and 950 mm. Then compare the top width (9.7 mm), height (8 mm) and angle (40 degrees) with the belt you are replacing. If they match, this is the correct profile and length.
- What should I send to get a quote?
- Send the part number SPZ 950 MN, the quantity you need, and any drive details you have. If you are unsure about the profile, include a photo of the marking on the old belt.
- Can I use this belt to replace a different profile?
- No. This is an SPZ profile narrow wedge V-belt with a 950 mm length. A different profile or length will not match the drive. Use the profile and length together when selecting a replacement.