V-belt Gates SPZ 775 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 775 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 775 MN and any equivalents.
The Gates SPZ 775 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a 775 mm length, a 9.7 mm top width, an 8 mm height and a 40 degree angle. The marking on the back of the belt is the most reliable way to identify the replacement you need.
Start by reading the marking on the old belt. Look for the profile and the length together, such as SPZ and 775 mm. A worn or dirty belt can hide the characters, so clean the back of the belt and check in good light. If the marking is unreadable, measure the top width and the outside length and send those values with your request.
This belt is a narrow wedge V-belt, also called a narrow V-belt. The SPZ profile and the 775 mm length are the key dimensions for matching. The 9.7 mm top width, 8 mm height and 40 degree angle describe the cross-section. Use these values to compare against the belt you are replacing.
Dimensions
- Section
- SPZ
- Length
- 775mm
Frequently asked questions
- How do I confirm the part number if the marking on the old belt is worn?
- Clean the back of the belt and look for the profile and length marking. If it is still not readable, measure the top width and the outside length. Send those measurements along with any remaining characters to MR Industrial Accessories for help confirming the right belt.
- What does SPZ 775 MN mean on this belt?
- SPZ is the profile and 775 is the length in millimeters. MN identifies the Gates Super HC MN series. The belt has a 9.7 mm top width, an 8 mm height and a 40 degree angle.
- What information should I send to request a quote?
- Send the part number SPZ 775 MN, or the profile and length from the old belt marking. If the marking is not clear, include the top width, height and outside length. Photos of the belt and the drive can also help confirm the correct replacement.