V-belt Gates SPZ 630 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 630 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 630 MN and any equivalents.
The Gates Super HC MN SPZ 630 MN is a narrow wedge V-belt with an SPZ profile and a 630 mm length. It is built for drives that call for a compact, high-capacity belt. To match it to the belt being replaced, compare the profile and the length on the old belt to this listing.
Start by reading the marking on the back of the belt you are replacing. The profile should read SPZ, and the length should correspond to 630 mm. This belt has a top width of 9.7 mm, a height of 8 mm and a 40-degree angle, so those dimensions can be checked against the old belt if the marking is worn.
If the marking is unreadable, measure the top width and the outside length of the old belt and compare them to the profile and length above. The SPZ profile and 630 mm length identify this belt; other dimensions follow from that profile. When you request a quote, include the part number SPZ 630 MN and the quantity you need.
Dimensions
- Section
- SPZ
- Length
- 630mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Match the profile and length on the old belt to the SPZ profile and 630 mm length listed here. The top width, height and angle can also be compared if the old belt is still measurable.
- What should I send to request a quote?
- Send the part number SPZ 630 MN and the quantity you need by WhatsApp or email. If you are unsure of the part number, send the marking on the back of the old belt or its measured profile and length.
- Can this belt be used on a drive that currently runs a different profile?
- The belt must match the pulley groove profile and the required length. This belt is an SPZ profile with a 630 mm length, so the drive should be set up for that profile and length.