V-belt Gates SPZ 560 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 560 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 560 MN and any equivalents.
This Gates SPZ 560 MN is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where a compact cross-section and a defined length are required. Confirm fit by checking the belt marking and the drive's pulley groove profile.
The SPZ profile has a 9.7 mm top width, 8 mm height, and 40° angle. The belt length is 560 mm. These dimensions let you match the belt to the drive's pulley grooves and center distance. When replacing, read the marking on the back of the old belt and compare it to the SPZ 560 MN code.
Narrow wedge V-belts like this one are common on industrial equipment such as pumps, fans, and compressors. They suit drives that need a higher power capacity than a classical V-belt of similar top width. Inspect pulleys for wear, alignment, and correct groove profile before installing a new belt.
To request a quote, send the part number SPZ 560 MN, the quantity, and the drive details. If you are unsure about the exact belt, share the old belt's marking and pulley groove dimensions. The team can help confirm the right belt for your application.
Dimensions
- Section
- SPZ
- Length
- 560mm
Frequently asked questions
- How do I confirm that the Gates SPZ 560 MN fits my drive?
- Check the old belt's marking for the SPZ profile and 560 mm length. Also verify that the pulley grooves match the SPZ cross-section: 9.7 mm top width, 8 mm height, and 40° angle. If the marking is unreadable, measure the top width and the outside length.
- What should I include when requesting a quote for this belt?
- Send the part number SPZ 560 MN, the quantity you need, and any drive details you have. If you are replacing an existing belt, include the marking from the back of the belt and the pulley groove dimensions.
- Can I use this belt on a drive that originally used a classical V-belt?
- Narrow wedge V-belts and classical V-belts have different cross-sections and pulley groove requirements. Do not substitute one for the other without checking that the pulleys are designed for the SPZ profile. The SPZ 560 MN has a 9.7 mm top width and 8 mm height.