V-belt Gates SPZ 3350 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 3350 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 3350 MN and any equivalents.
This Gates SPZ 3350 MN belt is a narrow wedge V-belt in the SPZ profile with a length of 3350 mm. The 9.7 mm top width, 8 mm height and 40° angle define its fit in the drive groove. Use these dimensions to match the belt you are replacing.
The SPZ profile is a narrow wedge section, often called a wedge belt. The 3350 mm length is the datum length for this belt. The 40° angle is the included angle of the V-section. These values are the key selection data when you are working from a part number or measuring an existing belt.
When you request a quote, send the part number SPZ 3350 MN or the profile and length. If you have the old belt, check the marking on the back for the profile and length. The top width and height can be measured with a caliper to confirm the section. This helps us confirm the right belt for your drive.
Narrow wedge belts are used in industrial drives where space is limited and higher power transmission is needed compared to classical V-belts. The SPZ profile is one of the narrow section sizes. The 3350 mm length fits drives with that center distance and pulley combination. If you are replacing multiple belts on the same drive, replace them as a set to keep load sharing even.
Dimensions
- Section
- SPZ
- Length
- 3350mm
Frequently asked questions
- What does the SPZ profile mean on this belt?
- SPZ is a narrow wedge V-belt profile. This belt has a top width of 9.7 mm, a height of 8 mm and a 40° angle. It fits pulleys with a matching SPZ groove.
- How do I confirm the length of the Gates SPZ 3350 MN?
- The length is 3350 mm. Check the marking on the back of the old belt for the profile and length, or measure the belt with a tape. If the marking is worn, send us the drive details and we can help confirm.
- Can I replace just one belt on a multi-belt drive?
- For drives with multiple belts, it is best to replace all belts as a set. This keeps the load shared evenly across the belts and helps avoid premature wear.