V-belt Gates SPZ 3000 MN

GATES SPZ 3000 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 3000 MN and any equivalents.

This Gates SPZ 3000 MN is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where space is limited and speeds are higher. The profile is SPZ, the length is 3000 mm, and the belt has a 40° angle.

Narrow wedge V-belts like this SPZ profile transmit more power in a smaller cross-section than classic V-belts. They are common on fans, pumps, compressors, and other driven equipment in plants and process lines. The SPZ profile has a 9.7 mm top width and an 8 mm height, so it fits pulleys designed for that groove size.

To confirm fit, check the old belt marking and the pulley groove. The belt length is 3000 mm, measured along the datum line. Match the profile and length exactly: SPZ 3000 MN. If the old belt is worn or the marking is unreadable, measure the outside length and the top width, and note the pulley groove dimensions. The 40° angle is the nominal included angle for this profile.

When replacing, inspect the pulleys for wear and alignment. A worn groove can cause the belt to sit too deep, leading to slip and heat. Replace belts in sets if the drive uses multiple belts, and check tension after the first run-in period. For a quote, send the part number SPZ 3000 MN and the quantity you need.