V-belt Gates SPZ 2540
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 2540 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2540 and any equivalents.
This Gates Super HC SPZ 2540 is a narrow wedge V-belt for industrial drives. It is identified by its SPZ profile and 2540 mm length. Use these two dimensions to confirm fit on your drive.
Narrow wedge V-belts are common in compact, high-speed industrial drives where standard V-belts would be too wide. The SPZ profile is a narrow cross-section, and this belt measures 9.7 mm at the top, 8 mm high, with a 40° angle. The 2540 mm length is the datum length used to match the belt to the drive.
To confirm fit, read the marking on the old belt. It should show SPZ and 2540 mm. If the old belt is worn or the marking is gone, measure the outside length and compare it to the 2540 mm datum length, and check the sheave groove width against the 9.7 mm top width. The same size is also listed under Optibelt SPZ 2540.
When you request a quote, send the part number Gates Super HC SPZ 2540 and the quantity. If you are replacing a set, include the number of belts on the drive so we can help you match the full set.
Dimensions
- Section
- SPZ
- Length
- 2540mm
Frequently asked questions
- What does the SPZ profile mean for fit?
- SPZ is the narrow wedge cross-section. This belt has a 9.7 mm top width, 8 mm height and 40° angle. The sheave groove must match this profile for the belt to seat correctly.
- How do I confirm the length?
- Check the marking on the old belt for SPZ 2540. If it is unreadable, measure the datum length and compare it to 2540 mm. You can also send a photo of the old belt marking with your quote request.
- Can I use this belt on any SPZ drive?
- It fits drives that call for an SPZ profile and a 2540 mm datum length. Always confirm both the profile and length, and check the sheave condition before installing a replacement.