V-belt Gates SPZ 2287 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 2287 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2287 MN and any equivalents.
This Gates SPZ 2287 MN is a narrow wedge V-belt from the Super HC MN series. The SPZ profile and 2287 mm length are the two dimensions to match before you order. The belt has a 9.7 mm top width, 8 mm height and a 40° angle.
Use the profile and length as your primary selection criteria. SPZ identifies the cross-section, and 2287 mm is the datum length. The top width of 9.7 mm and height of 8 mm describe the belt's cross-section, while the 40° angle is the included angle of the V. Confirm these values against the old belt or the drive's specification.
The marking on the back of the belt is the fastest way to confirm a match. If the existing belt reads SPZ 2287 MN, this is the same profile and length. If the marking is worn or unreadable, measure the top width and the outside length, then compare them to the values above.
For a quote, send the part number SPZ 2287 MN, the quantity, and the drive or equipment reference if you have it. If you are replacing a set, include the number of belts on the drive. Our team can confirm the profile and length from the data you provide.
Dimensions
- Section
- SPZ
- Length
- 2287mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- SPZ is the profile, which sets the cross-section. The 2287 mm is the length. Together they determine whether the belt fits the pulley grooves and the drive center distance.
- What are the cross-section dimensions of this belt?
- The top width is 9.7 mm, the height is 8 mm, and the angle is 40°.
- What should I send to request a quote?
- Send the part number SPZ 2287 MN, the quantity, and any drive or equipment reference. If you are replacing a set, tell us how many belts the drive uses.