V-belt Gates SPZ 2240 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 2240 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2240 MN and any equivalents.
The Gates SPZ 2240 MN is a narrow wedge V-belt in the Super HC MN series. This page covers how to match it to the belt you are replacing, using the marking on the old belt and the profile and length of this one.
Start with the belt currently on the drive. Read the marking printed on the back of the old belt and note the profile and the length. The Gates SPZ 2240 MN has a profile of SPZ and a length of 2240 mm, with a top width of 9.7 mm, a height of 8 mm and a 40-degree angle. If the old belt shows SPZ and 2240 mm, this belt matches those two dimensions.
If the marking is worn off or unreadable, measure the old belt instead. Check the top width and the outside length, then compare them with the 9.7 mm top width and 2240 mm length of this belt. Confirm the sheave groove is cut for an SPZ profile before ordering, since a different profile will not seat correctly.
When you send your quote request, include the part number SPZ 2240 MN, the quantity, and the equipment or drive it goes on. If you have the old belt in hand, send a photo of the back marking and of the belt itself. That lets our team confirm the profile and length and reply promptly with the right belt for your drive.
Dimensions
- Section
- SPZ
- Length
- 2240mm
Frequently asked questions
- How do I confirm this belt replaces the one on my drive?
- Compare the marking on the old belt with the profile and length of this belt: SPZ and 2240 mm. Also check that the sheave groove matches the SPZ profile.
- What measurements should I send with my quote request?
- Send the part number SPZ 2240 MN, the quantity, and the equipment or drive it is used on. A photo of the old belt's back marking helps confirm the match.
- What are the dimensions of this belt?
- It has an SPZ profile, a length of 2240 mm, a top width of 9.7 mm, a height of 8 mm and a 40-degree angle.