V-belt Gates SPZ 2060
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 2060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 2060 and any equivalents.
Gates Super HC SPZ 2060 is a narrow wedge V-belt for industrial drives that need a compact, high-capacity belt. It is commonly used on pumps, fans, compressors, and other driven equipment where space is limited and speeds are higher. Confirm fit by matching the profile, length, and cross-section dimensions to your existing belt.
This belt has an SPZ profile, a 2060 mm length, a 9.7 mm top width, an 8 mm height, and a 40° angle. These dimensions are the key to a correct match: check the belt marking and measure the old belt before ordering. If the marking is worn, the drive sheave groove and the center distance can help confirm the required profile and length.
Narrow wedge belts like the SPZ transmit more power than classical V-belts in the same space, so they are often found on industrial machinery where saving weight and space matters. Inspect sheaves for wear, alignment, and groove condition, and replace belts in sets when a drive uses multiple belts to keep load sharing even. For a quote, send the part number SPZ 2060, the quantity, and any details from the old belt.
We carry the Gates Super HC SPZ 2060 and can help you confirm it is the right belt for your drive. If you need assistance, contact us by WhatsApp or email with your part number and application details.
Dimensions
- Section
- SPZ
- Length
- 2060mm
Frequently asked questions
- How do I confirm that the Gates Super HC SPZ 2060 fits my drive?
- Match the profile (SPZ), length (2060 mm), top width (9.7 mm), height (8 mm), and angle (40°) to the belt you are replacing. Check the marking on the back of the old belt and compare it to these dimensions.
- What should I send to get a quote for this belt?
- Send the part number SPZ 2060, the quantity you need, and any photos or measurements of the old belt. If you are unsure of the profile or length, include the drive sheave details and center distance.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is best to replace all belts in the set at the same time. Mixing new and worn belts can cause uneven load sharing and vibration. Confirm the set quantity when you request a quote.