V-belt Gates SPZ 1637 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1637 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1637 MN and any equivalents.
The Gates SPZ 1637 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPZ profile, a 1637 mm length, a 9.7 mm top width, an 8 mm height, and a 40-degree angle. When you need a replacement, start by reading the marking on the back of the old belt.
The marking on the back of the belt is your best guide. Look for the profile and the length, not just the part number. On this belt, the profile is SPZ and the length is 1637 mm. The top width is 9.7 mm, the height is 8 mm, and the angle is 40 degrees. If the old belt is worn or the marking is hard to read, note any remaining characters and the belt's dimensions.
With the marking in hand, you can match the Gates SPZ 1637 MN by profile and length. This narrow wedge V-belt is built for drives that use SPZ section belts. Confirm the belt's cross-section and length before ordering. If the drive uses multiple belts, inspect all of them and replace them as a set so the load stays even.
Dimensions
- Section
- SPZ
- Length
- 1637mm
Frequently asked questions
- How do I identify the correct replacement belt?
- Read the marking on the back of the old belt. It usually shows the profile and length. For this belt, the profile is SPZ and the length is 1637 mm. If the marking is unreadable, measure the top width and height and compare them to the data for the Gates SPZ 1637 MN.
- What are the dimensions of the Gates SPZ 1637 MN?
- The profile is SPZ, the length is 1637 mm, the top width is 9.7 mm, the height is 8 mm, and the angle is 40 degrees.
- What should I send to request a quote?
- Send the part number, Gates SPZ 1637 MN, and the quantity you need. If you are replacing an existing belt, include the marking from the back of the old belt or its dimensions so we can confirm the match.