V-belt Gates SPZ 1562 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1562 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1562 MN and any equivalents.
Replace a worn narrow wedge V-belt with the Gates SPZ 1562 MN from the Super HC MN series. This belt has an SPZ profile and a length of 1562 mm, with a top width of 9.7 mm, a height of 8 mm, and a 40-degree angle. Use these dimensions to match the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows SPZ 1562 MN, this Gates belt matches directly. If the marking is faded or missing, measure the top width and the outside length, then compare them to the 9.7 mm top width and 1562 mm length listed here. The 40-degree angle and 8 mm height are also part of the profile.
A narrow wedge V-belt like this one runs in a matching SPZ pulley groove. Check the pulley groove for wear, cracks, or debris before installing a new belt. If the drive uses multiple belts, replace them as a set so the load stays even across all grooves.
When you request a quote, send the part number SPZ 1562 MN and the quantity you need. If you are unsure whether this is the right belt for your drive, include the old belt marking and the pulley groove profile. The team can confirm the belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 1562mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Check the marking on the back of the old belt for SPZ 1562 MN. If it is not readable, measure the top width and outside length and compare them to the 9.7 mm top width and 1562 mm length of this belt.
- What should I send with my quote request?
- Send the part number SPZ 1562 MN and the quantity. If you want us to verify the fit, also include the old belt marking and the pulley groove profile.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses several belts, replace them as a set. Mixing a new belt with worn belts can cause uneven loading across the grooves.