V-belt Gates SPZ 1512 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1512 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1512 MN and any equivalents.
The Gates SPZ 1512 MN is a narrow wedge V-belt in the Super HC MN series, built for drives that need a compact, high-capacity belt. With an SPZ profile and a 1512 mm length, it fits a specific class of industrial drives. Before you fit a replacement, inspect the drive and sheaves so the new belt seats and runs correctly.
Check sheave grooves for wear, burrs, or embedded debris. Worn grooves let the belt sit too deep, which reduces grip and shortens belt life. Confirm the sheaves are aligned and the shafts turn freely. If a sheave is damaged, replacing the belt alone will not correct the drive.
This belt measures 9.7 mm across the top, 8 mm in height, and has a 40° angle. The SPZ profile and 1512 mm length must match the drive. When you request a quote, send the part number SPZ 1512 MN and confirm the existing belt marking. We carry the Gates Super HC MN series and can help you verify the correct belt for your drive.
For drives using multiple belts, replace the full set at the same time. Mixing a new belt with worn belts changes how the load is shared and can lead to uneven tension. After fitting, check tension and recheck it after the first run-in period.
Dimensions
- Section
- SPZ
- Length
- 1512mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, burrs, or debris, and confirm sheave alignment and free shaft rotation. Correct any sheave damage before fitting the new belt.
- Can I replace just one belt on a multi-belt drive?
- No. Replace all belts in the set at the same time so they share the load evenly and maintain consistent tension.
- What information do you need to quote this belt?
- Send the part number SPZ 1512 MN and confirm the marking on your existing belt. If you have questions about the profile or length, include those details with your request.