V-belt Gates SPZ 1400 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1400 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1400 MN and any equivalents.
This Gates SPZ 1400 MN is a narrow wedge V-belt from the Super HC MN series. It is used in industrial drives where a compact, high-capacity belt is needed and the sheave groove is cut for an SPZ profile.
The SPZ profile is a narrow wedge section, so it sits deeper in the groove than a classic V-belt and transmits more power in the same space. The belt has a top width of 9.7 mm, a height of 8 mm, a 40-degree angle and a length of 1400 mm. It is common on fans, pumps, compressors and other plant equipment that run continuously.
To confirm fit, check the belt you are replacing. The marking on the back should read SPZ 1400 MN. Measure the outside length only as a cross-check, and make sure the sheave groove is an SPZ profile. If the old belt is worn or stretched, replace the full set on a multi-belt drive so the load stays even.
Dimensions
- Section
- SPZ
- Length
- 1400mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Look for SPZ 1400 MN on the back of the old belt. Also check that the sheave groove is an SPZ profile and that the belt length matches 1400 mm.
- What should I send to request a quote?
- Send the part number SPZ 1400 MN, the quantity you need, and a photo of the belt marking if you have one. We will confirm the belt and reply promptly.
- Can I replace just one belt on a multi-belt drive?
- On a drive with several belts, it is best to replace the full set at the same time. A new belt mixed with used belts can sit at a different tension and take more than its share of the load.