V-belt Gates SPZ 1312 MN

GATES SPZ 1312 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1312 MN and any equivalents.

The Gates SPZ 1312 MN is a narrow wedge V-belt in the Super HC MN series. If you are replacing a belt on a driven machine, the fastest way to confirm the match is to read the marking on the back of the old belt and compare it with the profile and length below. This page gives you the exact dimensions to check before you request a quote.

The belt is an SPZ profile with a 1312 mm length, a 9.7 mm top width, an 8 mm height and a 40° angle. These are the numbers to match against the belt you are removing. An SPZ profile belt will not sit correctly in a pulley cut for another profile, so verify the profile first, then confirm the length. If the marking on the old belt is worn or unreadable, measure the outside length and the top width and send those values with your request.

For a correct replacement, compare the full marking on the old belt with the part number above. The SPZ profile and 1312 mm length identify the belt; the top width, height and angle confirm it is the same construction. If the old belt has stretched or the drive has been modified, note that when you send your request so the team can help confirm the right belt or suggest an equivalent. We carry the Gates SPZ 1312 MN and can quote it by part number.

When you contact us, include the part number, the quantity you need, and any details from the old belt marking or drive nameplate. Photos of the belt and the pulley grooves are helpful if the marking is not clear. The team replies promptly by WhatsApp or email and can help you confirm the belt or suggest an equivalent.