V-belt Gates SPZ 1030 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPZ 1030 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPZ 1030 MN and any equivalents.
The Gates SPZ 1030 MN is a narrow wedge V-belt in the Super HC MN series, built to the SPZ profile with a 1030 mm length. If you are replacing a belt on an existing drive, match the marking on the old belt to this profile and length before you order.
The SPZ profile is a narrow wedge section, and this belt measures 9.7 mm across the top, 8 mm in height, and 40 degrees in the included angle. The length is 1030 mm. When you compare it to the belt coming off the drive, those are the figures to check against the old marking, not just the part number alone.
Send the part number SPZ 1030 MN, or the full marking from the back of the belt you are replacing, and the team can confirm it or suggest an equivalent. If the old belt is worn or the marking is gone, measure the outside length and the top width so the profile and length can be verified against this listing.
Dimensions
- Section
- SPZ
- Length
- 1030mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number SPZ 1030 MN by WhatsApp or email. If you have the old belt, include the marking from the back and the drive details so the team can confirm the match.
- How do I confirm this is the right belt for my drive?
- Check the old belt's marking for the SPZ profile and the 1030 mm length, and compare the top width of 9.7 mm and height of 8 mm. If those match, this is the same size.
- Can you help if the old belt marking is unreadable?
- Yes. Measure the outside length and the top width of the old belt and send those figures along with the drive information. The team can then check them against the SPZ 1030 MN.