V-belt Gates SPCP 2000
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Predator
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPCP 2000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPCP 2000 and any equivalents.
This Gates Predator belt is a narrow wedge V-belt in the SPC profile, with a 2000 mm length. It is built for high-load industrial drives where a compact, deep-section belt is required. Confirm fit by matching the profile and length to your drive.
Narrow wedge V-belts like this SPC section are common on heavy-duty drives such as compressors, crushers, mixers and large fans. The SPC profile concentrates the cord load for higher power per belt width than a classic V-belt. If your drive calls for an SPC belt and the center distance works out to a 2000 mm belt, this part is the correct section and length.
To confirm fit, read the marking on the back of the old belt. You are looking for the SPC profile and the 2000 mm length. Also check the pulley grooves for wear and the sheave diameter, because a worn groove can make a new belt sit too deep. If the old belt is not marked, measure the outside length and the top width to identify the section.
When replacing a set, fit all belts on the drive at the same time. Mixed wear or mixed lengths can cause uneven loading and vibration. Send the part number SPCP 2000, the quantity, and a photo of the old belt marking if you have one. We carry Gates belts and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPC
- Length
- 2000mm
Frequently asked questions
- What does the SPC profile mean for my drive?
- SPC is a narrow wedge V-belt section. It is used where a standard V-belt would be too wide or would not carry the load. Confirm that your pulleys are cut for the SPC section before ordering.
- How do I confirm the length?
- The belt is listed at 2000 mm. Check the marking on the back of your old belt for the SPC profile and the 2000 mm length. If the marking is gone, measure the old belt and compare.
- Can you help if I am not sure this is the right belt?
- Yes. Send the part number SPCP 2000, the drive details, and a photo of the old belt marking. We will help confirm the belt or suggest an equivalent.