V-belt Gates SPC 2600
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPC
- Series
- Delta Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and MITSUBOSHI: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPC 2600 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPC 2600 and any equivalents.
This page covers the Gates Delta Narrow SPC 2600, a narrow wedge V-belt in the SPC profile with a 2600 mm length. Before fitting a new belt, the drive and its sheaves are worth a look, since worn grooves and misalignment shorten belt life. We supply this belt to maintenance, engineering and purchasing teams across the US, Canada, Mexico and South America.
Start the inspection with the sheaves. Check the groove flanks for wear, the groove profile for the SPC section, and the alignment between the two pulleys. A belt that seats too deep in a worn groove will slip, and misalignment will wear one side of the belt faster than the other. Confirm the sheaves are clean and free of rust or buildup before the new belt goes on.
Next, check the rest of the drive: the shaft bearings for play, the mounting bolts for tightness, and the tensioning arrangement for free movement. Set tension to the drive manufacturer's specification for an SPC section belt, then recheck after the first run-in period. Keep the old belt until the new one is seated and running correctly, so you can compare the marking on the back if anything looks off.
The same size is also listed under Stark SPC 2600 and Mitsuboshi SPC 2600, so if you are matching a belt already on the drive, that gives you more than one option to compare.
Dimensions
- Section
- SPC
- Length
- 2600mm
Frequently asked questions
- What do I need to send to get a quote for this belt?
- Send the part number SPC 2600, the brand Gates, and the quantity you need. If you are replacing a belt on an existing drive, a photo of the marking on the back of the old belt helps us confirm the match.
- Can you help confirm this is the right belt for my drive?
- Yes. Send the belt marking or the drive details by WhatsApp or email and our team will confirm the SPC profile and 2600 mm length against what you have, or suggest an equivalent.
- Should I replace both belts on a two-belt drive at the same time?
- On a multi-belt drive, belts wear together and a new belt matched with a used one can carry an uneven share of the load. Replacing the set keeps tension even across the drive.