V-belt Gates SPBP 4500
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Predator
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPBP 4500 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 4500 and any equivalents.
The Gates Predator SPBP 4500 is a narrow wedge V-belt in the SPB profile, 4500 mm long. It measures 16.3 mm across the top, stands 13 mm high and has a 40-degree angle. This page is for maintenance and purchasing staff who need to match it to the belt being replaced.
Start with the marking on the belt you are removing. The part number and the profile should match what is printed there. Compare the SPB profile, the 4500 mm length, the 16.3 mm top width, the 13 mm height and the 40-degree angle against the old belt before you order. If any of those do not line up, the belt is not the same one.
A narrow wedge V-belt of this size is normally one of several on a drive, so check the other belts while you are in there. Look for cracks, missing sections, glazing, and any belt sitting lower than the rest in its groove. Worn sheaves and misaligned pulleys shorten belt life, so those are worth a look at the same time.
Send the part number, the profile and the length from the old belt when you request a quote. If the marking is worn away, send photos of the belt and the drive, including the sheave grooves, and the team will help confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- SPB
- Length
- 4500mm
Frequently asked questions
- How do I confirm the SPBP 4500 is the right belt for my drive?
- Read the marking on the belt you are replacing and compare it with the part number, the SPB profile and the 4500 mm length. Also check the 16.3 mm top width, the 13 mm height and the 40-degree angle against the old belt.
- Can MR help if the marking on the old belt is unreadable?
- Yes. Send photos of the belt and the drive, including the sheave grooves, along with any measurements you can take, and the team will help confirm the right belt or suggest an equivalent.
- What should I include when requesting a quote?
- Send the part number, the profile and the length from the old belt. If you have them, include the top width, height and angle as well so the team can match it accurately.