V-belt Gates SPBP 3550 PowerBand

GATES SPBP 3550 PowerBand belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 3550 PowerBand and any equivalents.

When replacing a banded V-belt, the fastest way to get the correct part is to read the marking on the back of the belt you are removing. This page covers the Gates SPBP 3550 PowerBand, a banded V-belt with a 3550 mm length. Use the details here to confirm it matches your drive before you request a quote.

Start by locating the part number on the old belt. The marking typically shows the series and the length, so look for SPBP 3550 PowerBand or the equivalent length figure. If the belt is worn or the printing has rubbed off, measure the outside length and compare it to the 3550 mm listed for this belt. Also note the number of ribs or bands in the assembly, since a banded belt must match the drive's pulley grooves exactly.

A banded V-belt ties multiple V-belts together with a top cover, which keeps them running as a single unit. That construction is used where several belts run side by side and must stay synchronized. Before ordering, inspect the pulleys for wear, alignment and debris, and check that all grooves are clean. If you are replacing a set, confirm that every belt in the drive is the same part number and length.

To request a quote, send the part number SPBP 3550 PowerBand, the quantity, and a photo of the marking on your old belt if it is readable. If the marking is gone, include the outside length and the number of bands. Our team can confirm the belt or suggest an equivalent based on the details you provide.