V-belt Gates SPBP 2900
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Predator
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPBP 2900 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 2900 and any equivalents.
The Gates SPBP 2900 is a Predator narrow wedge V-belt with an SPB profile and a 2900 mm length. When you need to replace a belt on a driven machine, matching the profile and length on the old belt is the first step. This page gives you the dimensions to compare against the belt you are removing.
Start by reading the marking on the back of the belt you are replacing. Look for the profile and the length, then compare them to this belt: SPB profile, 2900 mm length, 16.3 mm top width, 13 mm height and a 40 degree angle. If those values match, the Gates SPBP 2900 is the correct size for that drive position.
If the old belt is worn or the marking is unreadable, measure the top width and the outside length with a tape or caliper. The 16.3 mm top width and 2900 mm length are the key figures to confirm. A belt with a different profile or length will not sit correctly in the pulley grooves or maintain the required tension.
For a quote, send the part number SPBP 2900, the profile SPB and the length 2900 mm by WhatsApp or email. If you are unsure, include a photo of the old belt marking and the pulley grooves. The team can confirm the right belt or suggest an equivalent based on those details.
Dimensions
- Section
- SPB
- Length
- 2900mm
Frequently asked questions
- How do I confirm the Gates SPBP 2900 fits my drive?
- Check the marking on your old belt for SPB and 2900 mm. If the profile and length match, and the top width is 16.3 mm, this belt is the correct size for that position.
- What measurements should I send for a quote?
- Send the part number SPBP 2900, the profile SPB and the length 2900 mm. If you have the old belt, a photo of its back marking helps confirm the match.
- Can I replace just one belt in a multi-belt drive?
- For drives with multiple belts, replacing all belts at the same time helps maintain even tension and load sharing. Use the same profile and length across the set.