V-belt Gates SPBP 2240
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Predator
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPBP 2240 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 2240 and any equivalents.
This Gates Predator belt is a narrow wedge V-belt with an SPB profile and a 2240 mm length. For maintenance and purchasing teams, the profile and length are the two numbers that decide whether a belt will sit correctly in the pulley groove and run at the right center distance.
The SPB profile sets the cross-section: 16.3 mm top width, 13 mm height, and a 40-degree angle. That geometry must match the pulley groove, so check the old belt's marking or measure the groove before ordering. The 2240 mm length is the datum you compare against the drive's current setup.
When you request a quote, send the part number SPBP 2240 and confirm the SPB profile and 2240 mm length. If the marking on the back of the old belt is worn, a photo of the belt and the pulley groove helps our team confirm the right belt or suggest an equivalent.
Narrow wedge V-belts like this one are selected by profile and length first, then by construction. The Predator series is what we carry in this size. For drives running multiple belts, replace the set together so the load stays evenly distributed.
Dimensions
- Section
- SPB
- Length
- 2240mm
Frequently asked questions
- What do the SPB profile and 2240 mm length mean for my drive?
- SPB is the cross-section family, with a 16.3 mm top width, 13 mm height, and 40-degree angle. The 2240 mm length is the belt's datum length. Both must match your pulley groove and drive layout.
- How do I confirm this is the right belt for my equipment?
- Check the marking on the back of the old belt. If it reads SPB and 2240 mm, this Gates Predator belt matches that profile and length. If the marking is unreadable, send a photo of the belt and pulley groove.
- What should I send to get a quote?
- Send the part number SPBP 2240, the profile SPB, and the length 2240 mm by WhatsApp or email. Our team will confirm the belt or suggest an equivalent.