V-belt Gates SPBP 2060
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Predator
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPBP 2060 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPBP 2060 and any equivalents.
The Gates SPBP 2060 is a Predator narrow wedge V-belt in the SPB profile. It measures 2060 mm in length, with a 16.3 mm top width, 13 mm height and a 40-degree angle. Use these figures to match it against the belt you are replacing.
Start by reading the marking on the back of the old belt. If it shows SPB and 2060, the Gates SPBP 2060 is the direct match. The SPB profile and 2060 mm length identify the belt; the 16.3 mm top width, 13 mm height and 40-degree angle confirm the cross-section. Do not rely on a visual match alone, since a belt of similar width can differ in length or profile.
If the old belt is worn or the marking is unreadable, measure the outside length and check the cross-section against the profile data. A belt that is too long or too short will not tension correctly, and the wrong profile will not sit properly in the pulley groove. When you request a quote, send the part number SPBP 2060 and, if possible, the old belt's marking and dimensions.
For drive inspection, check the pulleys for wear and alignment before fitting a new belt. Confirm that the replacement matches the SPB profile and the 2060 mm length. If you are replacing more than one belt on the same drive, order the same part number for each position so the set matches.
Dimensions
- Section
- SPB
- Length
- 2060mm
Frequently asked questions
- How do I confirm the Gates SPBP 2060 fits my drive?
- Check the marking on the old belt. It should show SPB and 2060. If it does, the Gates SPBP 2060 is the correct profile and length. You can also measure the old belt's outside length and cross-section to compare with the 2060 mm length, 16.3 mm top width, 13 mm height and 40-degree angle.
- What should I send to request a quote for this belt?
- Send the part number SPBP 2060, along with the old belt's marking or dimensions if you have them. Our team can confirm the belt or help you find the right match.
- Can I use this belt on a drive that takes multiple belts?
- Yes, if the drive uses SPB profile belts of 2060 mm length. For drives with multiple belts, order the same part number for each position so the set matches.