V-belt Gates SPB 2680 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPB 2680 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 2680 MN and any equivalents.
The Gates SPB 2680 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPB profile, a 2680 mm length, a top width of 16.3 mm, a height of 13 mm, and a 40-degree angle. Match these figures to the belt you are replacing before you order.
The most reliable way to identify the correct replacement is to read the marking on the back of the old belt. Confirm that the profile is SPB, that the length is 2680 mm, and that the part number is SPB 2680 MN. If the old belt is worn or the marking is unreadable, measure the top width and height and compare them with the 16.3 mm and 13 mm values above.
A narrow wedge V-belt like this one runs in a matched groove, so the profile and the 40-degree angle need to agree with the pulley. Check the sheave grooves for wear while the belt is off. If the drive uses more than one belt, replace the full set at the same time so the load stays evenly divided.
We carry the Gates SPB 2680 MN for industrial drives. To request a quote, send the part number SPB 2680 MN by WhatsApp or email. If you are unsure whether this is the right belt, send a photo of the back marking and the drive, and our team will help confirm it.
Dimensions
- Section
- SPB
- Length
- 2680mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt. The profile should be SPB, the length should be 2680 mm, and the part number should be SPB 2680 MN. You can also measure the top width and height and compare them with 16.3 mm and 13 mm.
- What should I send to get a quote?
- Send the part number SPB 2680 MN by WhatsApp or email. If you want us to help confirm the belt, include a photo of the back marking and the drive.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the full set together so the load is shared evenly. Check the pulley grooves for wear at the same time.