V-belt Gates SPB 1700 MN
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Super HC MN
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES SPB 1700 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1700 MN and any equivalents.
The Gates SPB 1700 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPB profile, a 1700 mm length, a 16.3 mm top width, a 13 mm height and a 40° angle. Before fitting this belt, inspect the drive and sheaves so the new belt seats and wears correctly.
Check sheave grooves for wear, corrosion or embedded debris. Worn or damaged grooves can shorten belt life and cause slippage even when the replacement belt is correct. Confirm the sheaves are aligned and that the drive turns freely before installation.
This belt is identified by its marking: Gates SPB 1700 MN, Super HC MN. Match the profile and length on the old belt to the new one. If the old marking is unreadable, measure the outside length and top width, and note the drive arrangement so we can help confirm the right belt.
For a quote, send the part number SPB 1700 MN, the quantity needed and any drive details you have. If you are replacing multiple belts on one drive, include the full set so we can help you order correctly.
Dimensions
- Section
- SPB
- Length
- 1700mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect sheave grooves for wear, corrosion or debris, verify alignment and confirm the drive turns freely. Correcting these issues before fitting the belt helps prevent premature wear and slippage.
- How do I confirm the Gates SPB 1700 MN is the right belt?
- Compare the profile and length on the old belt marking with SPB and 1700 mm. If the marking is worn, measure the outside length and top width, and note the drive setup so we can help confirm.
- What information do you need to quote this belt?
- Send the part number SPB 1700 MN, the quantity required and any drive details. If you are replacing a set, include all belts for that drive so we can help you order the correct items.