V-belt Gates SPB 1260 MN

GATES SPB 1260 MN belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SPB 1260 MN and any equivalents.

The Gates SPB 1260 MN is a narrow wedge V-belt in the Super HC MN series. It has an SPB profile, a 1260 mm length, a 16.3 mm top width, a 13 mm height and a 40 degree angle. When you need a replacement, the marking on the back of the old belt is the most reliable starting point.

Read the old belt before you remove it. The marking typically shows the profile and the length, so SPB 1260 confirms the cross-section and the length in millimeters. Also note the brand and series, because the same profile and length can be listed under different series names. If the marking is worn or missing, measure the top width and the outside length to compare with the data above.

This belt is a narrow wedge V-belt, also called a narrow V-belt or wedge belt. The SPB profile and 1260 mm length identify the size, while the 16.3 mm top width and 13 mm height describe the cross-section. The 40 degree angle is the included angle of the V. Use these values to check that the replacement matches the drive.

Send the full marking, including the part number and any series text, when you request a quote. If you have the old belt, a photo of the back and a photo of the side profile help confirm the size. The team can help confirm the right belt or suggest an equivalent based on the data you provide.