Poly-V belt Gates PL 2197

GATES PL 2197 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PL 2197 and any equivalents.

This is a Gates Micro-V Poly-V belt in the PL profile with a length of 2197 mm. The profile and the length are the two numbers that matter when you are matching a serpentine drive, so start there before you look at anything else on the old belt.

The PL profile sets the rib geometry, and 2197 mm sets the running length. When you read a belt back, confirm both: a belt with the right length but the wrong profile will not seat in the pulley grooves, and the right profile at the wrong length will not tension correctly. The same size is also listed under Optibelt as PL 2197, so you can compare that listing against your drive if you are working from a different reference.

The Micro-V name identifies this as a multi-rib belt, which is what most serpentine accessory drives use. If the marking on the back of the belt is worn or unreadable, measure the length and count the ribs, then send those numbers along with the part number you have. We carry Gates belts and can help confirm the right belt or suggest an equivalent when a direct match is not clear.

A drive inspection is worth doing at the same time. Check the pulley grooves for wear or debris, confirm the tensioner moves freely, and look at the other belts on the same drive. If more than one belt runs on the same pulleys, replacing them as a set keeps the load even across the drive.