Poly-V belt Gates PK 2050
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- Poly-V belts
- Series
- Micro-V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
GATES and STARK: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES PK 2050 belongs to poly-V belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PK 2050 and any equivalents.
This is the Gates Micro-V PK 2050, a Poly-V (multi-rib) belt in the PK profile with a length of 2050 mm. It is a direct replacement part for drives specified to that profile and length.
Before fitting a new belt, inspect the drive. Check each sheave groove for wear, corrosion, burrs and embedded debris, since a worn or damaged groove will shorten the life of any belt. Confirm the sheaves are clean and correctly aligned, and check the tensioner and any idler pulleys for rough or noisy bearings.
Read the marking on the back of the old belt and compare it with the part number on the new one. The PK profile and the 2050 mm length must match the drive specification. If the old belt is worn or stretched, the marking is still the reference point for ordering.
On multi-rib drives, replace belts as a set where the drive uses more than one. The same size is also listed under Stark PK 2050 and Optibelt PK 2050. If you are unsure of the correct belt for a drive, send the part number and a photo of the old belt marking by WhatsApp or email and our team will confirm it or suggest an equivalent.
Dimensions
- Profile
- PK
- Length
- 2050mm
Frequently asked questions
- What are the profile and length of this belt?
- The Gates Micro-V PK 2050 is a Poly-V (multi-rib) belt in the PK profile with a length of 2050 mm.
- What should I check on the drive before fitting it?
- Inspect the sheave grooves for wear, corrosion and debris, confirm alignment, and check the tensioner and idler pulleys for rough bearings. Correct the cause of the old belt's failure before installing the new one.
- How do I request a quote?
- Send the part number PK 2050 by WhatsApp or email. If you are unsure of the right belt, include a photo of the marking on the old belt and our team will confirm it or suggest an equivalent.