V-belt Gates D 96
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- D
- Series
- Delta Classic
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES D 96 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for D 96 and any equivalents.
The Gates Delta Classic D 96 is a classical V-belt with a D profile and a 2440 mm length. It is used on heavy-duty industrial drives where a classical cross-section is required. To confirm fit, match the D profile and the 2440 mm length to the belt you are replacing.
Classical V-belts like this D-profile belt are common on drives that need a robust cross-section, such as large fans, pumps, compressors and other plant equipment. The D profile refers to the belt's cross-section; the 2440 mm length is the datum length. Both must match the drive's pulley grooves and center distance.
The most reliable way to confirm fit is to read the marking on the back of the old belt. Look for the profile letter and the length. If the old belt is worn or the marking is unreadable, measure the length and check the pulley groove width against the D profile. When replacing a set, fit all belts on the drive at the same time so they share the load evenly.
We carry the Gates Delta Classic D 96 and can help you confirm the right belt or suggest an equivalent. Send the part number, the profile and the length by WhatsApp or email to request a quote.
Dimensions
- Section
- D
- Length
- 2440mm
Frequently asked questions
- How do I confirm the Gates Delta Classic D 96 fits my drive?
- Check the marking on the back of the old belt for the D profile and the 2440 mm length. If it matches, the belt will fit the same pulleys. If the marking is gone, measure the belt length and check the pulley groove width against the D profile.
- Where is a classical D-profile V-belt used?
- Classical V-belts are used on heavy-duty industrial drives such as large fans, pumps and compressors. The D profile is a classical cross-section, so it suits drives that require a robust belt.
- What should I send to request a quote?
- Send the part number, the profile and the length by WhatsApp or email. For the Gates Delta Classic D 96, that is D profile, 2440 mm length. If you are replacing a set, mention how many belts the drive uses.