V-belt Gates CC180
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CC
- Series
- Hi-Power Dubl-V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES CC180 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CC180 and any equivalents.
The Gates CC180 is a double-V (hexagonal) belt in the Hi-Power Dubl-V series. Its CC profile and 4680 mm length are the two figures to match against the belt you are replacing. The same size is also listed under Dayco as CC180.
The CC profile sets the cross-section and the rib geometry that must sit correctly in the pulley grooves. The 4680 mm length is the datum to check against the old belt or the drive specification. Both figures appear in the part number, so the marking on the back of the belt is the quickest way to confirm what is on the drive before you order.
A double-V belt drives from both faces, so inspect both sides of every belt in the drive for wear, cracking or glazing, and check the pulleys for groove wear and alignment. Where a drive runs more than one belt, replace the set together so the load stays shared evenly.
To request a quote, send the part number CC180, the quantity, and the drive or equipment it fits by WhatsApp or email. If the marking is worn, send the profile and the length in mm. We carry Gates and can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- CC
- Length
- 4680mm
Frequently asked questions
- What do the CC profile and 4680 mm length tell me?
- The CC profile defines the cross-section that must match the pulley grooves, and 4680 mm is the belt length. Match both to the belt being replaced.
- Is the same size listed under another brand?
- Yes. The same size is also listed under Dayco as CC180.
- What should I send for a quote?
- Send the part number CC180, the quantity, and the drive or equipment it fits. If the old belt is worn, send the profile and the length in mm.