V-belt Gates CC 330
- Brand
- GATES
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- CC
- Series
- Hi-Power Dubl-V
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
GATES CC 330 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for CC 330 and any equivalents.
The Gates CC 330 is a double-V (hexagonal) belt in the Hi-Power Dubl-V series. Its CC profile and 8440 mm length are the two figures to check first when you are replacing a belt on a drive that runs from both sides.
Because a double-V belt contacts both pulley grooves, the profile has to match the sheave and the length has to match the center distance. This belt is listed as CC profile at 8440 mm, so confirm both against the belt you are removing before you order. The same size is also listed under Optibelt as CC 330.
The most reliable identification is the marking on the back of the old belt. Read the profile and the length, note the part number, and compare them with the drive. If the belt is worn or the marking is gone, measure the length and check the groove profile on the pulleys.
For a quote, send the part number CC 330, the profile and the length, along with the quantity you need. If the drive runs more than one belt, order the full set so the belts share the load evenly. If anything does not line up, our team can review the details and help confirm the right belt.
Dimensions
- Section
- CC
- Length
- 8440mm
Frequently asked questions
- What do the CC profile and 8440 mm length tell me?
- The CC profile identifies the cross-section that fits the pulley grooves, and 8440 mm is the length of the belt. Both need to match the drive before you replace a belt.
- How do I identify the belt on the machine?
- Read the marking on the back of the belt and note the part number, profile and length. Compare those with the drive and with the CC 330 data before ordering.
- What should I send to request a quote?
- Send the part number CC 330, the profile, the length and the quantity. If the drive uses more than one belt, tell us so we can quote the full set.